C 1500 Suburban 2WD V8-4.8L VIN V (2002)
3. Connect the coolant heater electrical connector (2).
4. Position the oil cooler hose adapter end.
5. Install a NEW oil cooler hose adapter gasket.
6. Install the oil cooler hose adapter bolts (2).
-
Tighten the oil cooler hose adapter bolts to 12 Nm (106 inch lbs.).
7. Install the oil cooler hose bracket bolt (1).
-
Tighten the oil cooler hose bracket bolt to 25 Nm (118 ft. lbs.).
8. Install the oil pan skid plate and bolts.
-
Tighten the oil pan skid plate bolts to 20 Nm (15 ft. lbs.).
9. Lower the vehicle.
10. Fill the cooling system/engine block. Refer to Draining and Filling Cooling System.
