C 1500 Suburban 2WD V8-4.8L VIN V (2002)
4. Install the left exhaust manifold pipe nuts.
-
Tighten the transmission bolts to 100 Nm (74 ft. lbs.).
-
Tighten the exhaust pipe hanger bracket bolts to 12 Nm (106 inch lbs.).
-
Tighten the exhaust manifold pipe nuts to 50 Nm (39 ft. lbs.).
5. Install the right exhaust manifold pipe nuts.
-
Tighten the nuts to 50 Nm (39 ft. lbs.).
6. Connect the oxygen sensor electrical connector (1).
7. Connect the CPA retainer.
8. Remove the adjustable jackstands from catalytic converter or exhaust manifold pipe.
9. Install the oil pan skid plate and bolts, if necessary.
-
Tighten the bolts to 20 Nm (15 ft. lbs.).
