C 1500 Suburban 2WD V8-4.8L VIN V (2002)
8. Remove the exhaust heat shield from the studs.
Installation Procedure
1. If vehicle is a sport utility vehicle, install the exhaust heat shield to the studs.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the exhaust heat shield nuts.
-
Tighten the nuts to 9 Nm (80 inch lbs.).
3. If the vehicle is a crew cab pick-up truck, install the exhaust heat shield(s) to the studs.
4. Install the exhaust heat shield nuts.
-
Tighten the nuts to 9 Nm (80 inch lbs.).
5. Install the exhaust front heat shield to the studs.
6. Install the exhaust front heat shield nuts,