C 1500 Suburban 2WD V8-4.8L VIN V (2002)
1. Install a new throttle body gasket.
2. Connect the coolant hoses to the throttle body.
3. Install the throttle body assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Always use a torque wrench in order to obtain the proper torque.
4. Install the throttle body attaching bolts.
Tighten
Tighten the throttle body bolts to 10 N.m (89 lb in).
5. Connect the TP and IAC sensor harness connector.
6. Connect the crankcase ventilation hose to the throttle body.
IMPORTANT: Verify that the throttle actuator motor harness connector and the connector seal are properly installed and not damaged.
