C 1500 Suburban 2WD V8-4.8L VIN V (2002)
1. Install the inflatable restraint side impact module wiring harness (2) to the seat frame (3) while guiding the wiring harness (2) through the
appropriate spots on the seat frame (3).
2. Install the inflatable restraint side impact module wiring harness retaining clips to the seat frame.
3. Install the inflatable restraint side impact module (1) to the seat frame.
4. Install the inflatable restraint side impact module retainer.
NOTE: Refer to Fastener Notice in Cautions and Notices.
5. Install the inflatable restraint side impact module retaining bolts (3).
Tighten
Use only hand tools to tighten the fasteners to 10 N.m (89 lb in).
6. Install the seat back cover.
7. Install the front seat.
8. Enable the SIR system.
