C 1500 Suburban 2WD V8-4.8L VIN V (2002)
4. Tighten the bolt in order to compress the servo cover.
5. Install the servo cover retaining ring.
6. Remove the J29714-A from the oil pan flange.
Notice: Refer to Fastener Notice in Service Precautions.
7. Install the oil pan bolt.
^
Tighten the oil pan bolt to 11 Nm (97 inch lbs.).
8. Install the heat shield.
9. Install the two bolts securing the transmission heat shield to the transmission.
^
Tighten the bolts to 17 Nm (13 ft. lbs.).
10. Install the exhaust pipe assembly.
11. Lower the vehicle.
12. Fill the transmission to the proper level with DEXRON III transmission fluid. Refer to Transmission Fluid Checking Procedure.
