chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Throttle Body Assembly Replacement (Without ETC)|Page 7304 > < Throttle Body Assembly Replacement (Without ETC)|Page 7302
Page 3
background image

1. Install a new throttle body gasket.
2. Connect the coolant hoses to the throttle body.
3. Install the throttle body assembly.

NOTE:  Refer to Fastener Notice in Service Precautions.

IMPORTANT:  Always use a torque wrench in order to obtain the proper torque.

4. Install the throttle body attaching bolts.

Tighten
Tighten the throttle body bolts to 10 N.m (88.5 lb in).

5. Connect the TP sensor harness connector.
6. Connect the crankcase ventilation hose to the throttle body.

IMPORTANT:  Verity that the throttle actuator motor harness connector and the connector seal are properly installed and not damaged.

Throttle Body Assembly Replacement (Without ETC)|Page 7304 > < Throttle Body Assembly Replacement (Without ETC)|Page 7302