C 1500 Suburban 2WD V8-6.5L DSL Turbo VIN F (1997)
Ball Joint: Service and Repair
Lower Ball Joint Replacement
^
Tools Required:
-
J 9519-E Ball Joint Remover and Installer Set
-
J 23742 Ball Joint Separator
-
J 9519-40 Lower Ball Joint Remover Adapter
-
J 9519-E Ball Joint Remover and Installer Set
-
Or Equivalent
REMOVAL
NOTE: Raise the vehicle and support the frame with suitable safety stands.
Remove or disconnect the following:
1. Tire and wheel assembly.
-
Place a floor jack under the control arm spring seat and raise it until it supports the control arm.
WARNING: Floor Jack must remain under the control arm spring seat during removal and installation to retain the spring and control arm in
position or personal injury may result.
2. Brake caliper.
NOTE: Support the caliper with a piece of wire to prevent damage to the brake line.