chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 7261 > < Diagram Information and Instructions|Page 7259
Page 2
background image

Pressure Switch Assembly Resistance Check (2 Of 2)

Tools Required

-

J 39775 4L60E Jumper Harness

-

J 39200 Digital Multimeter

-

J 35616 Connector Test Adapter Kit

Important: Whenever the transmission 20-way connector is disconnected and the engine is running, multiple DTCs will set. Be sure to clear these codes
when you are finished with this procedure

Important: This procedure tests the Automatic Transmission Fluid Pressure Manual Valve Position Switch (TFP Val. Position Sw.) circuits and the
Automatic Transmission Fluid Temperature (TFT) Sensor circuit. Do not use this procedure to test other Automatic Transmission circuits, refer to
4L60-E Automatic Transmission Internal Wiring Harness check.

Diagram Information and Instructions|Page 7261 > < Diagram Information and Instructions|Page 7259