C 1500 Truck 2WD V6-4.3L VIN W (1996)
Fig. 14 Stub shaft torque reading
7. Using an inch-pound torque wrench and a 12-point deep socket, measure torque required to turn stub shaft. Take reading with handle of torque
wrench near vertical position. Turn stub shaft to right stop, then back 1/4 turn at an even rate. Record torque reading.
8. Torque reading should be 4-10 inch lbs. If not, adjuster plug may not be tightened properly or may have turned during adjuster plug nut
installation. Thrust bearings and races may also be damaged.
