chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 18477 > < Diagram Information and Instructions|Page 18475
Page 2
background image

If you need to tow a light-duty trailer with a standard four-way round pin connector you can also get an adapter from your dealer.

Camper/Fifth-Wheel Trailer Wiring Package

The eight-wire camper harness is located under the front edge of the pickup box on the driver's side of the vehicle, attached to the frame bracket. A
connector will have to be added to the wiring harness which connects to the camper.

The eight-wire harness contains the following camper/trailer circuits:

-

Yellow: Left Stop/Turn Signal 

-

Dark Green: Right Stop/Turn Signal 

-

Brown: Taillamps 

-

White: Ground 

-

Light Green: Back-up Lamps 

-

Light Blue: Center High-Mounted Stoplamp (CHMSL) 

-

Red: Battery Feed 

-

Dark Blue: Trailer Brake 

If your vehicle is equipped with the "Heavy-Duty Trailering" option, please refer to Heavy-Duty Trailer Wiring Package , earlier in this section.

When the camper-wiring harness is ordered without the heavy-duty trailering package, an eight-wire harness with a seven-pin connector and separate
CHMSL connector are located at the rear of the vehicle and are tied to the vehicle's frame.

Diagram Information and Instructions|Page 18477 > < Diagram Information and Instructions|Page 18475