C 1500 Truck 2WD V6-4.3L VIN X (2003)
3. Warm the bumper surface with the J 25070 152 mm (6.0 in) from the surface to a minimum of 21°C (70°F).
Important: Do not touch the adhesive backing of the bumper.
4. Remove the backing from the front end of the bumper.
5. Press the fascia to the bumper surface while continuing to remove the backing.
6. Hand roll the fascia to the bumper to ensure proper adhesion.
7. Inspect the fascia for bonding.
8. Install the fascia to the bumper.