C 1500 Truck 2WD V6-4.3L VIN X (2003)
1. Remove the center seat.
Caution: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.
2. Remove the rivets (1) retaining the cupholder from the bottom of the center seat.
3. Remove the cupholder.
Installation Procedure
1. Install the cupholder.
2. Install the rivets (1) retaining the cupholder to the bottom of the center seat.
3. Install the center seat.
Cupholder Replacement - Luxury
Cupholder Replacement (Luxury)
Removal Procedure
1. Remove the upper trim bezel from the center console.
2. Insert a flat bladed tool between the console and cupholder assembly.
3. Remove the cupholder assembly by prying the cupholder to release the clips (2).
4. Remove the wire connector for the cupholder.
5. Remove the cupholder from the console.
Installation Procedure
1. Place the cupholder assembly over the console.
2. Connect the wire connector to the cupholder assembly.
3. Push on the corners of the cupholder assembly till all the retaining clips (2) are seated.
4. Install the upper trim bezel.
Cupholder Replacement - Non-Luxury