C 1500 Truck 2WD V6-4.3L VIN X (2003)
Tailgate Striker: Service and Repair
Lock Striker Replacement - Endgate
Lock Striker Replacement - End Gate
Removal Procedure
1. Open the endgate.
2. Remove the tail/turn signal lamp.
3. Remove the striker bolt.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the striker bolt.
Tighten the bolt to 50 N.m (37 lb ft).
2. Install the tail/turn signal lamp.
3. Close the endgate.
