C 1500 Truck 2WD V6-4.3L VIN X (2003)
5.
Using the mud flap as a template, locate and mark the location of the hole (1) in the pickup box wheelhouse.
Important:
After drilling the holes, apply the appropriate anti-corrosion primer. Refer to the GM Refinish Material Booklet # ,4901M-D (English) or #
4901-D-F (French) for additional information.
6.
Center punch the marked location and drill a 6.35 mm (1/4 in) hole. Install the plastic retainer in the hole (1) of the mud flap.
7.
Tighten fastener at the hole (2) location of the mud flap.
Tighten
Tighten the fastener to 25 N.m (18 lb ft).
8.
For vehicles with short box, use the following procedure: