C 1500 Truck 2WD V6-4.3L VIN X (2003)
2. Install the park brake lever.
Note: Refer to Fastener Notice in Cautions and Notices.
3. Install the park brake lever mounting nuts.
-
Tighten the nuts to 25 N.m (18 lb ft).
4. Connect the park brake release cable and housing to the park brake lever.
5. Connect the park brake warning lamp connector.
6. Install the MID-bussed electrical center to the bracket.
7. Install the left side hinge pillar panel. Refer to Trim Panel Replacement - Hinge Pillar in Interior Trim.
8. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
