C 1500 Truck 2WD V6-4.3L VIN X (2003)
3. Install the rocker arm cover.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
4. Install the rocker arm cover bolts.
Tighten the bolts to 12 Nm (106 inch lbs.).
5. Position the engine wiring harness.
6. Connect the engine wiring harness clips.
7. Connect the following electrical connectors:
-
The ignition coil (1)
-
The ignition coil drive (2)
-
The generator (3)