C 1500 Truck 2WD V6-4.3L VIN X (2003)
5.
Remove the vent screens (1), located in the base of the distributor, by inserting a plastic-handled, long blade awl or pick (2) into each of the two
airflow vent holes and popping out the screen. If there are no EIP vent screens in the airflow vent holes, check the vent holes for debris and clear
as necessary before reassembling the distributor.
6.
If the EIP vent screens are not present, the distributor cap and rotor do not require replacement.
7.
Install the foam sleeve, P/N 15190971 around the section of the A/C accumulator line that is routed directly above the distributor. Cut a slit in the
sleeve and secure it to the line using tie-straps. Do not install a new foam sleeve if a sleeve is already in place on the A/C accumulator line.
8.
2001-03 CALIFORNIA, 2003 MASSACHUSETTS & MAIN VEHICLES ONLY:
Install a Recall Identification Label. Also, for California vehicles, complete a "Proof Of Correction" certificate upon recall completion.
