C 1500 Truck 2WD V6-4.3L VIN X (2003)
4. Remove the caps from the fuel tank pipes.
5. Connect the fuel feed/return pipes at the fuel tank pipes.
6. Install the EVAP canister.
7. If equipped with 4WD, install the fuel feed/return and EVAP pipes to the clip on the transfer case.
8. Install the fuel feed/return pipe and EVAP pipe clip to the transmission.
9. Lower the vehicle.
10. Install the fuel feed/return pipe bracket to the stud.
NOTE: Refer to Fastener Notice in Service Precautions.
