C 1500 Truck 2WD V6-4.3L VIN X (2003)
Important: The following components can be serviced without removing the valve body from the transmission:
^
The torque converter clutch solenoid (1)
^
The pressure control solenoid (2)
^
The internal wiring harness (3)
^
The 2-3 shift solenoid (4)
^
The 1-2 shift solenoid (5)
^
The transmission fluid pressure manual valve position switch (6)
^
The 3-2 shift solenoid (7)
^
The Torque Converter Clutch Pulse Width Modulation (TCC PWM) solenoid (8)
2. Remove the fluid level indicator.
3. Remove the transmission filter.
4. Disconnect the internal wiring harness electrical connectors from the following components:
^
The transmission fluid pressure manual valve position switch (1)
^
The 1-2 shift solenoid (2)
^
The 2-3 shift solenoid (3)
^
The pressure control solenoid (4)
^
The TCC PWM solenoid (5)
^
The 3-2 shift solenoid (6)
5. Remove the fluid indicator stop bracket bolt (2).
6. Remove the fluid indicator bracket (1).
