C 1500 Truck 2WD V6-4.3L VIN X (2003)
5. Connect the reservoir assembly (1) to the pump housing assembly (2).
6. Install the O-ring seal.
7. Install the connector and fitting assembly (5). To install the variable assist steering actuator (3) and retaining ring (4); refer to Power Steering
Pump Flow Control Valve Actuator Replacement - On Vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
8. Install the pump mounting studs (2) to the pump housing (1).
Tighten
-
Tighten the pump mounting studs (2) to 58 N.m (43 lb ft).
-
Tighten the connector and fitting assembly (5) to 75 N.m (55 lb ft).