C 1500 Truck 2WD V6-4.3L VIN X (2003)
Steering Shaft: Service and Repair
Intermediate Steering Shaft Replacement - Upper
INTERMEDIATE STEERING SHAFT REPLACEMENT (UPPER)
TOOLS REQUIRED
J 42640 Steering Column Anti-Rotation Pin
REMOVAL PROCEDURE
1. Install the J 42640 in the steering column lower access hole.
NOTE: The wheels of the vehicle must be straight ahead and the steering column in the LOCK position before disconnecting the steering column or
intermediate shaft from the steering gear. Failure to do so will cause the SIR coil assembly to become uncentered, which may cause damage to the coil
assembly.
2. Mark the relationship of the bolt and the clamp at both ends of the upper intermediate shaft.
IMPORTANT: Mark the relationship of the intermediate shaft components in order to assure proper installation.
3. Mark the relationship of the upper intermediate shaft to the lower intermediate shaft.
4. Remove the nut and the bolt from the lower shaft to the upper shaft connection.