C 1500 Truck 2WD V6-4.3L VIN X (2003)
Front Steering Knuckle: Service and Repair
Rear Wheel Steering
STEERING KNUCKLE REPLACEMENT
TOOLS REQUIRED
J 24319-B Universal Steering Linkage Puller
REMOVAL PROCEDURE
1. Raise the vehicle. Refer to Vehicle Lifting.
NOTE: Refer to Rear Wheel Steering Lifting and Jacking Notice in Service Precautions.
2. Remove the tire and wheel.
3. Remove the wheel hub and bearing.
4. Remove the upper ball joint.
5. Remove the lower ball joint.
6. Remove the outer tie rod retaining nut and bracket (2).
7. Disconnect the outer tie rod from the steering knuckle using the J 24319-B (1).
