C 1500 Truck 2WD V6-4.3L VIN X (2003)
9. Remove the oil pan and the gasket.
10. Grasp firmly while pulling down with a twisting motion in order to remove the filter.
11. Remove and discard tine filter seal. The filter seal may be stuck in the pump; if necessary, carefully use pliers or another suitable tool to remove
the seal.
12. Inspect the fluid color
13. Inspect the filter. Pry the metal crimping away from the top of the filter and pull apart. The filter may contain the following evidence for root cause
diagnosis
^
Clutch material
^
Bronze slivers indicating busting wear
^
Steel particles
14. Clean the transmission case and the oil part gasket surfaces with solvent, and air dry. You must remove all traces of the old gasket material.
