C 1500 Truck 2WD V6-4.3L VIN X (2003)
Notice: Refer to Fastener Notice in Service Precautions.
6. Hold the control lever and tighten the shift lever assembly nut against the control lever.
^
Tighten the nut to 37 Nm (27 ft. lbs.).
7. Seat the control lever boot to the floor.
8. Install the control lever boot screws, if removed.
^
Tighten the screws to 1.6 Nm (14 inch lbs.).
9. Install the control lever boot retainer, if removed.
