C 1500 Truck 2WD V8-305 5.0L VIN M SFI (1997)
Brake Master Cylinder: Service and Repair
Filling Master Cylinder Reservoir
CAUTION: Do not use fluid that has a petroleum base. Do not use a container that has bean used for petroleum based fluids or is wet with water.
Petroleum based fluids cause swelling and distortion of rubber parts in the hydraulic brake system and water lowers the brake fluid boiling point. Keep
all fluid containers capped to prevent contamination.
Thoroughly clean the top of reservoir cover before removal. This helps prevent dirt from getting into the reservoirs. Remove the cover and diaphragm
and add fluid as required to bring the level to the full mark (typically located on the right side the reservoir). Use Delco Supreme 11(R) Hydraulic Brake
Fluid (GM P/N 1052535) or an equivalent DOT 3 motor vehicle brake fluid.
