chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Front Door Hinge > < Door Handle (Interior) - Rattles|Page 8355
Page 8
background image

SERVICE PROCEDURE:

1.

Remove the door trim panel (refer to "Door Trim Replacement" procedure in the appropriate service manual).

2.

Drill out the six (6) rivets holding the inner door handle housing in place.

3.

Remove the control rods from the inner handle housing.

4.

Remove the inner door handle housing.

5.

Disconnect the power switch wire harness (if applicable).

6.

Install a revised inner door handle housing (P/N 22086873 (LH) or 22086874 (RH)).

7.

Connect the power switch wire harness (if applicable).

8.

Connect the control rods to the inner door handle housing.

9.

Install the inner door handle housing rivets.

10.

Install the door trim panel.

SERVICE PARTS INFORMATION

Part Number

Description

22086873

Control Assembly-FRT S/D I/S HDL & LK (LH)

22086874

Control Assembly-FRT S/D I/S HDL & LK (RH)

Parts are currently available from GMSPO.

WARRANTY INFORMATION

For vehicles repaired under warranty use:

Labor 0p.

Description

B4301

Handle and remote control, front
door lock - R&R or replace (LH).

B4300

Handle and remote control, front
door lock - R&R or replace (RH).

Use applicable labor time guide for labor hours.

Front Door Hinge > < Door Handle (Interior) - Rattles|Page 8355