C 1500 Truck 2WD V8-350 5.7L (1989)
Figure No. 2
On trucks with external off coolers (cooler mounts in front of radiator) or trucks with internal oil coolers that have a line coupler directly adjacent to the
steering gear box, it will be necessary to install a secondary oil cooler line protector in addition to the primary protector. On these vehicles, a condition
may exist where the hose coupler (where the steel pipe and rubber hose connect) contacts the side of the steering gear box (See Figure 2). In order to
address this condition, a secondary protector can be made out of a 1" I.D. x 2" piece of heater hose, P/N 8885575 (25 ft roll). To install protector, split
hose lengthwise down center and place it around the cooler hose next to the gear box and attach it with two (2) plastic tie straps, P/N 3816659.
