C 1500 Truck 2WD V8-350 5.7L (1989)
2. Clutch front plate using J 36045.
^
Align the puller center bolt to the compressor shaft.
^
Thumb tighten the three puller bolts into the threaded holes.
^
Turn the center bolt to the right with the socket wrench until the front plate is loosened.
Removing The Shaft Key
3. Shaft key (27) by lightly tapping it loose with a slot screw driver and hammer.
4. Internal bearing snap ring (4) with internal type snap ring pliers.
5. Rotor pulley assembly.
^
Insert J 37792 into the snap ring groove.
^
Align the thumb head bolts of J 8433 to the puller fingers and tighten.
