Transfer Case - High Shift Effort or Blockouts - Technical Service Bulletin (TSB 903287A)
Figure 2
Disassembly of the Transfer Case After Removal From Vehicle-Clean the transfer case using a solvent and a stiff brush.
Remove or Disconnect (Figures 1 & 2)
1)
Front output flange nut (77), washer (76), rubber sealing washer (75) and front output flange (74) from the front output shaft.
2)
Indicator lamp switch (46) and O-ring seal (47).
3)
Speedometer sensor (9) and seal.
4)
Poppet screw (68), O-ring seal (69), poppet plunger (70) and poppet spring (71).
Mainshaft Extension and Oil Pump Housing
