C 1500 Truck 2WD V8-350 5.7L VIN K TBI (1995)
Clutch Pedal Assembly: Service and Repair
Hydraulic Clutch System
1. Disconnect battery ground cable, then remove lower filler panel(s) or steering column covers. Remove lower left side of air conditioning duct if
necessary to gain clearance.
2. Remove clutch start switch, noting position for installation reference, then remove clutch master cylinder push rod from pedal.
3. Remove clutch pedal nut, bolt and braces, noting positions for installation reference, then the pedal and spring. When removing bolt, slide a similar
long rod or screw into bracket to keep parts together and in order.
4. Reverse procedure to install. Torque clutch pedal nut to 26 ft. lbs.
5. Remove bushings and spacer, then the bumper, if worn or damaged.
