chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Key-In Warning Buzzer|Page 8310 > < Diagram Information and Instructions|Page 8307
Page 1
background image

Audible Warning Device: Description and Operation
Key-In Warning Buzzer

Voltage is supplied at all times to the Audio Alarm Module through the STOP-HAZ Fuse and the ORN (140) wire. With the key in the Ignition Switch
and the Ignition Switch in ACC, LOCK or OFF, the chime or buzzer will sound if the left door is open.

With the door open, the LH Door Jamb Switch closes to ground. This provides a ground to the Audio Alarm Module through the TAN (158) wire, the
Key-In Ignition Switch and the LT GRN (80) wire. The chime or buzzer will sound as long as the door is open or the key is in the Ignition Switch.

Key-In Warning Buzzer|Page 8310 > < Diagram Information and Instructions|Page 8307