chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Relays and Modules - Cooling System > < Four Wheel Anti-Lock Brake System
Page 1
background image

Electronic Brake Control Module: Service and Repair
Rear Wheel Anti-Lock Brake System

Fig. 85 EBCM & APV Valve Assembly Replacement.

When replacing the EBCM be sure to use the correct replacement EBCM for the system that is being serviced. The RWAL EBCM uses a
black electrical connector. Failure to use the correct EBCM will result in system malfunction.

1. Disconnect battery ground cable.
2. Disconnect EBCM electrical connectors, Fig. 85.
3. Remove EBCM by pulling towards front of vehicle.
4. Reverse procedure to install.

Relays and Modules - Cooling System > < Four Wheel Anti-Lock Brake System