C 1500 Truck 2WD V8-393 6.5L DSL Turbo (1994)
Removing Steering Shaft Components
Correct Upper To Lower Shaft Orientation
IMPORTANT
^
Mark upper shaft assembly (56) and lower steering shaft assembly (59) to ensure proper assembly. Failure to assemble properly will cause
steering wheel to be turned 180 degrees.
IMPORTANT
^
Remove only those components necessary to do repairs.
DISASSEMBLE
^
STEERING COLUMN SHAFT ASSEMBLY
A. Upper shaft assembly (56), lower steering shaft assembly (59).
^
Tilt 90 degrees to each other and disengage.
B. Centering sphere (57) from upper shaft assembly (56).
^
Rotate sphere 90 degrees and slip out.
C. Joint preload spring (58) from centering sphere (57).
ASSEMBLE
^
STEERING COLUMN SHAFT ASSEMBLY
A. Joint preload spring (58) to two centering sphere (57).
B. Centering sphere (57).
^
Lubricate with lithium grease, slip into upper shaft assembly (56), and rotate sphere 90 degrees.
C. Upper shaft assembly (56) to lower steering shaft assembly (59).
^
Line up marks and tilt assemblies 90 degrees to each other.