C 1500 Truck 2WD V8-393 6.5L DSL Turbo (1994)
Shift Indicator Adjustment
ADJUST
1. Position the shift lever in "N" (Neutral) notch.
2. Move pointer clip (10) on edge of shift bowl (11) to centrally position pointer on "N" (Neutral).
^
Make sure the cable (9) rests on shift bowl and not on column jacket.
3. Push the clip (10) fully seated onto the bowl (11).
4. Make sure the clip is tight on the bowl and does not slip.
5. Move the shift lever through all positions and then back to "N" to check adjustment. Make sure the pointer covers a portion of each graphic, or the
flag fills the entire window for each graphic of the shift indicator (8).
Shift Lever
SHIFT LEVER REPLACEMENT
Shift Lever Replacement
REMOVE OR DISCONNECT
1. Pivot pin (30) from the bowl assembly
2. Shift lever (23) from the bowl assembly being careful not to lose spring (31), or insulator (29).
3. Insulator (29) from shift lever (23).
4. Spring (31).
INSTALL OR CONNECT
NOTE: If problems are experienced while installing shift lever over spring, a shim may be used as a guide.
1. Spring (31).
