C 1500 Truck 2WD V8-393 6.5L DSL Turbo VIN S (1996)
Wastegate Solenoid: Service and Repair
Wastegate Solenoid
WARNING: Failure to disconnect the negative battery terminal may result in personal injury or damage to the vehicle's components. Turn
OFF the vehicle ignition, unless instructed otherwise.
REMOVAL PROCEDURE
Disconnect the negative battery cable under the following circumstances:
-
When installing an electrical unit.
-
When a tool or equipment could easily come Into contact with "live"exposed electrical terminals.
1. Disconnect the negative battery cables.
2. Disconnect the electrical connector from the solenoid.
3. Disconnect the vacuum hoses.
4. Remove the solenoid mounting bolt.
5. Remove the wastegate solenoid.
INSTALLATION PROCEDURE
1. Install the wastegate solenoid.
2. Install the wastegate mounting bolt.
3. Connect the vacuum hoses.
4. Connect the electrical connector.
5. Connect the negative battery cables.
