chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Body and Frame|Seats > < Sunroof / Moonroof Module|Locations|Page 15867
Page 1
background image

Sunroof / Moonroof Panel: Adjustments

Sunroof Window Height and Opening Fit Adjustment

1. In order to adjust the glass height, the sunroof glass must be in the zero (closed) position.

Important:  Do not remove the screws from the sunroof mechanism.

2. Loosen the 4 adjustment screws

Notice:  Refer to Fastener Notice in Service Precautions.

3. Adjust the rear glass panel (1) so that it is flush with the roof panel (3), (0-2.0 mm (0.079 in) above 3).

Tighten rear screws to 7 N.m (62 lb in).

4. Adjust the front glass panel (2) so that it is flush with the roof panel (3), (0-2.0 mm (0.079 in) below 3).

Tighten front screws to 7 N.m (62 lb in).

Body and Frame|Seats > < Sunroof / Moonroof Module|Locations|Page 15867