C 1500 Truck 2WD V8-4.8L VIN V (2001)
3. Install the inboard pivot bolt (1).
Tighten the bolt to 35 N.m (26 lb ft).
4. Install the seat belt retractor.
5. Install the lumbar assembly (or power lumbar/bolster assembly if equipped).
6. Install the seat back trim cover and pad.
7. Connect the lumbar cable (6) underneath the seat cushion (disconnect the wire harness if equipped with power lumbar).
8. Install the seat trim panel.
9. Install the head restraint and guides.
10. Install the seat into the vehicle.
Front Seat Back Hinge and Recliner Mechanism Replacement
Front Seat Back Hinge and Recliner Mechanism Replacement
Removal Procedure
1. Remove the front seat from the vehicle.
2. Remove the seat trim panel.
3. Remove the seat cushion frame.
4. Remove the seat back frame.
5. Remove the outboard pivot bolt.
6. Remove the bolts holding the seat back folding mechanism.
