C 1500 Truck 2WD V8-4.8L VIN V (2001)
Radiator Hose: Service and Repair
Inlet
Radiator Hose Replacement - Inlet Engine
Removal Procedure
1. Drain the cooling system.
2. Loosen the air cleaner outlet duct clamps at the following locations:
^
Throttle body
^
Mass Airflow/Intake Air Temperature (MAF/IAT) sensor
3. Remove the radiator inlet hose clip from the outlet hose.
4. Remove the air cleaner outlet duct.
5. If necessary, remove the engine sight shield.
6. Remove the radiator vent inlet hose from the radiator inlet hose clips.