C 1500 Truck 2WD V8-4.8L VIN V (2001)
Air Door Cable: Service and Repair
Mode Control Cable Replacement
MODE CONTROL CABLE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the instrument panel (IP) bezel. Refer to Bezel Replacement - IP Cluster in Instrument Panel, Gauges and Console.
2. Remove the radio.
3. Remove the heater control assembly.
4. Disconnect the mode cable from the heater/ventilation module.
5. Remove the mode cable from the IP carrier.
INSTALLATION PROCEDURE
1. Install the mode cable to the IP carrier.
2. Connect the mode cable to the heater/ventilation module.
3. Install the heater control assembly.
4. Install the radio.
5. Install the IP bezel. Refer to Bezel Replacement - IP Cluster in Instrument Panel, Gauges and Console.