chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Exhaust Gas Recirculation > < Engine Compartment EVAP Pipe Removal Procedure|Page 6771
Page 8
background image

3. Install the fuel tank.
4. Lower the vehicle.
5. Refill the fuel tank.
6. Connect the negative battery cable.
7. Tighten the fuel filler cap.
8. Inspect for leaks.

8.1. Turn ON the ignition for 2 seconds.
8.2. Turn OFF the ignition for 10 seconds.
8.3. Turn ON the ignition.
8.4. Inspect for fuel leaks.

Exhaust Gas Recirculation > < Engine Compartment EVAP Pipe Removal Procedure|Page 6771