C 1500 Truck 2WD V8-4.8L VIN V (2001)
Idle Air Control Motor (IAC): Service and Repair
IDLE AIR CONTROL (IAC) VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the idle air control (IAC) valve electrical connector.
2. Remove the IAC valve attaching screws (4).
3. Remove the IAC valve (3).
4. Remove the IAC valve O-ring seal (2).
NOTE: Refer to IAC valve notice in Service Precautions.
5. Clean the IAC valve O-ring sealing surface, the pintle valve seat, and the air passage.
^
Clean the IAC valve using GM cleaner P/N 1052626 or GM X - 66A. Use a shop towel or parts brush to remove heavy deposits.
^
If the air passage has heavy deposits, remove the throttle body for complete cleaning.
^
Shiny spots on the pintle or seat are normal and do not indicate misalignment or a bent pintle shaft.
6. Inspect the IAC valve O-ring for cuts, cracks, or distortion. Replace the O-ring if the O-ring is damaged.
INSTALLATION PROCEDURE
IMPORTANT: If installing a new IAC valve be sure to replace the IAC valve with an identical part. The pintle shape of the IAC valve and the
diameter of the IAC valve are designed for the specific application.