C 1500 Truck 2WD V8-4.8L VIN V (2001)
5. Turn the steering wheel 180 degrees in order to gain access to the remaining hole.
6. Insert a screwdriver into the remaining access hole and push the leaf spring to release the notched pin that retains the inflator module.
7. Tilt the top of the inflator module rearward to gain access to the SIR wiring.
8. Disconnect the SIR lead wire from the clip on the inflator module.
9. Disconnect the SIR lead wire from the clip on the steering wheel.
10. Disconnect the connector position assurance (CPA) retainer from the SIR connector.
11. Disconnect the SIR connector.
CAUTION: When carrying a live inflator module, make sure the bag opening is pointed away from you. This minimizes the chance of injury
in the case of an accidental deployment. Never carry the inflator module by the wires. Never carry the inflator module by the connector on
the underside of the module.
Make sure that the bag and trim cover are facing up whenever you place a live inflator module on any surface. This is necessary to provide a
