C 1500 Truck 2WD V8-4.8L VIN V (2001)
Control Arm: Service and Repair
Rear Upper
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the Real Time Damping (RTD) sensor (if equipped). Refer to Rear Position Sensor Replacement - Electronic Suspension in Real Time
Damping (RTD).
3. Remove the upper control arm retaining nut and bolt from the frame bracket.
4. Remove the upper control arm retaining nut and bolt from the axle bracket.
5. Remove the upper control arm.
Installation Procedure
1. Install the upper control arm.
2. Install the upper control arm retaining bolt and nut to the axle bracket.
