C 1500 Truck 2WD V8-4.8L VIN V (2001)
1. Remove the front grill assembly.
2. Place a drain pan under the vehicle.
3. Disconnect the lower oil cooler line from the radiator fitting.
4. Disconnect the oil cooler line from the auxiliary cooler fitting.
5. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
6. Pull the plastic cap back from the quick connect fitting and down along the cooler line about two inches.
7. Using a bent-tip screwdriver, pull on one of the ends of the E-clip until the clip is out of position and can be completely removed.
8. Remove the E-clip from the quick connect fitting.
9. Discard the E-clip.
10. Pull the cooler line straight out from the quick connect fitting.
