C 1500 Truck 2WD V8-4.8L VIN V (2001)
Selector Shaft: Service and Repair
Manual Detent Spring and Roller Replacement
Manual Detent Spring and Roller Replacement
Removal Procedure
1. Remove the oil pan and suction filter.
2. Remove the two detent spring bolts (3). Remove the detent spring assembly (2).
Installation Procedure
1. Install the detent spring assembly (2) onto the control valve assembly. Confirm that the roller of the detent spring assembly rests on the detent
lever (1).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install two detent spring bolts (3).
^
Tighten the bolts to 12 Nm (108 inch lbs.).
3. Install the oil pan and suction filter.
