C 1500 Truck 2WD V8-5.3L VIN T (1999)
6. Turn the cruise control cable at the engine-end fitting in order to straighten the cruise control module ribbon, as needed.
Ensure that the ribbon is flat and vertical.
7. Slide the cruise control cable conduit over the ribbon.
^
Install the tangs to the cruise control module housing.
^
Ensure that the tangs snap securely into place.
8. Snap the cruise control cable engine-end fitting over the nail head stud on the throttle lever.
9. Connect the cruise control cable conduit fitting to the engine cable bracket.
^
Ensure that the tabs snap securely into the hole.
^
Route the cruise control cable above the accelerator cable.
^
Ensure that the clip snaps securely into place.
10. Ensure that the arrow points to the throttle.
11. Push the cable adjuster plunger into the lock position.
The plunger should now set flush.
