C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
Water deflectors seal the inner panel. Water deflectors prevent water from entering into the body. A strip of adhesive between the deflector and the door
secures the deflector.
Removal Procedure
1. Remove the trim panel.
2. Remove the water deflector.
2.1 Pull the waterproof sealing tape from the deflector.
2.2 Using a flat-blade tool, break the bond between the sealer and the door.
Installation Procedure
1. Using waterproof tape or 3M(R) 777 (or equivalent), install the water deflector to the door.
2. Install the trim panel to the door.
Window Regulator
Removal Procedure
The power window motor cannot be serviced. Replace the power window motor as a unit with the regulator.
Tools Required
J 34940 Rivet Gun
1. Disconnect the negative battery cable.
2. Remove the trim panel.
3. Remove the water deflector.
4. Remove the inner mounting panel assembly.
5. Drill out the front rivets securing the regulator to the door inner panel.
6. Drill out the rear rivets securing the regulator to the door inner panel.
7. Remove the regulator from the inner panel.
