C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
Vacuum Brake Booster: Service and Repair
Vacuum Brake Booster Replacement
REMOVAL PROCEDURE
CAUTION: Before removing or installing any electrical unit or when a tool or equipment could easily come in contact with "live" exposed
electrical terminals, disconnect the negative battery cable to help prevent personal injury and/or damage to the vehicle or components.
Unless instructed otherwise, the ignition switch must be in the "OFF" or "LOCK" position.
1. Disconnect the negative battery cable.
2. Apply the parking brake.
3. Remove the master cylinder nuts.
4. Remove the master cylinder and bracket.
5. Disconnect the vacuum hose.
6. Remove the retainer.
7. Remove the stoplamp switch.
8. Remove the pushrod.
9. Remove four nuts.
10. Remove the booster assembly.
11. Remove the gasket.
INSTALLATION PROCEDURE