C 1500 Truck 2WD V8-6.5L DSL Turbo VIN F (1998)
Camshaft Gear/Sprocket: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the battery negative cable from the battery.
2. Drain the cooling system.
3. Rotate the engine to TDC.
4. Remove the upper fan shroud from the radiator.
5. Remove the drive belt from the pulleys.
6. Remove the lower fan shroud from the radiator.
7. Remove the crankshaft balancer from the engine.
8. Remove the water pump from the engine block.
9. Remove the engine front cover from the engine block.
10. Remove the bolt from the timing chain sprocket to the camshaft.
11. Remove the fuel injection pump drive gear from the camshaft.
12. Remove the timing chain and sprocket from the camshaft.
